Clearwater CH0030 TA Plus Alkalinity Increaser for Swimming Pool and Spa Treatment, White, 19.0 cm*9.7 cm*9.7 cm

Product Information

Fluctuating pH levels: When there is insufficient alkalinity in your hot tub water, it means the pH level will fluctuate wildly. The dissolved base in water increases the pH and titrates an equivalent amount of CO 2 to bicarbonate ion and carbonate ion.

Ocean alkalinity enhancement has been proposed as one option to add alkalinity to the ocean and therefore buffer against pH changes. When you’re adjusting your hot tub’s chemicals, you should always get the TA dialed in first, then adjust the pH. You should be monitoring your hot tub water and testing it regularly, at least two times every week. Measuring your spa’s Total Alkalinity once a week will help you catch a significant increase before it becomes a problem.Without proper alkalinity levels, your pool water can become corrosive or scale-forming, leading to discomfort, damage to pool equipment, and potential harm to swimmers. Before you get in your hot tub, test its TA and pH levels again to make sure they’re where they need to be and adjust again if necessary. The increasing carbon dioxide level in the atmosphere, due to carbon dioxide emissions, results in increasing absorption of CO 2 from the atmosphere into the oceans.

And if you ever need to troubleshoot, just refer back to this guide to remind yourself of everything you need to know about Total Alkalinity. Balancing your pool can be tricky, and you may find after raising the alkalinity that the pH level is now too high. Although alkalinity is primarily a term used by limnologists [5] and oceanographers, [3] it is also used by hydrologists to describe temporary hardness. As a result, upwelling areas (where water from the deep ocean is pushed to the surface) also have higher alkalinity values. In the ocean, alkalinity is completely dominated by carbonate and bicarbonate plus a small contribution from borate.These chemicals, although useful in treating swimming pool water, are notorious for reducing pH concentration in water.

We recommend adding it in stages, so that you don’t overdo it and potentially spike the TA and pH levels.Alkalinity roughly refers to the molar amount of bases in a solution that can be converted to uncharged species by a strong acid. High alkalinity can also cause scaling, where calcium deposits accumulate on the pool surfaces, equipment, and even within the plumbing system. This can be anything from body oil and sweat, to chemical residue from your bathing suit, and even urine.