ThermoPro TP50 Digital Thermo-Hygrometer Indoor Room Thermometer with Recording and Climate Indicator for Room, Climate Control Monitor

Product Information

There are also two buttons on the front that are easy to use and see; one button is for alternating between Celsius and Fahrenheit, and the other for resetting the max/min temperature.

There are no features at all on this model. It’s either on or off, and if you read around in here, the hygrometer only works on some of them. It certainly didn’t work on mine.Separate the device from the power supply or remove the batteries before cleaning. Only use a dry cloth to clean the exterior of the device. Do not use any cleaning fluid to avoid damaging the electronics. The High and Low only report as the "Highest" high &"Lowest" low temp and humidity measured since the last reset. You are not able to set High and Low parameters If you are trying to determine the actual humidity, then I would say NO. It does not give a humidity reading, but just a smile face for good, a frown for bad, etc. The temperature reading is usually 4 to 5 degrees less than it should be, also. I would go with something more accurate. Greenhouse thermometers are a great way to monitor the temperature without a lot of effort. Here you will find some useful information to help you choose the best greenhouse thermometer.

Data on screen is clearly laid out and easy to interpret, including arrows to indicate if temp/humidity is rising or falling The plastic casing is relatively robust, and has a hole cut out in the top that makes the thermometer easy to hang. However, unlike some of the other thermometers featured here, it doesn’t have an official waterproofing rating – rain can get inside if it’s left outdoors in the garden. Nevertheless, it seems to work well in greenhouses without being negatively effected by humidity. Some thermometers don’t mention any form of weatherproofing, in which case you should presume that they haven’t got any. For a greenhouse thermometer to be long lasting and effective, it should ideally at least describe itself as ‘water resistant’. The numbers for both the temperature and humidity are sufficiently large and easy to read, and the screen clearly displays other information as well. At a glance, directionally arrows indicate whether the temperature/humidity is dropping or rising, and the unit automatically interprets whether the humidity percentage is considered within ‘dry’, ‘comfortable’ or ‘wet’ levels.So, when you first put in the battery, it start recording the highs and lows. So, my lowest humidity wise was 32 low humidity so that was pretty pretty pretty dry and the highest was 69. So, guys this is something that you could see also with this one this one was 38 and 57. You might like a device that alerts you when there has been a large change in humidity or when the humidity levels are outside your preferred parameters. Power source