About this deal
until filler has fully set. Protect from temperatures below 5 °C until set. Filler may stain/varnish differently to
wood filler, which are more stable and sturdier than regular screws. How long does wood filler take to dry? projects right here at Homebase. Frequently Asked Questions Can you paint straight onto masonry filler?
Credit limit exceeded
If you’re looking for something that will perform better than tetrion for interior filling then try the Gyproc range. They don’t try and do everything, but what they do try to do, they do well. Another brand to look out for is Toupret, who do a whole range of different fillers for different specific jobs. The issue I have when using Tetrion All-Purpose filler on exterior masonry work is the longevity of the product. It’s pants!! Say you fill a load of windowsills with it, the filler dries, then it rains. The filler just turns to mush again! A product which we are led to believe is capable of being used on the outside of a building turns to mush when it gets wet?? There is something not right with that. Ensure surfaces are dry clean and free from dust and loose materials. Remove all decayed wood down to It is very easy to mix Tetrion All-Purpose filler to a fine, smooth consistency, which makes applying the it very easy too. Sanding the filler once set is nice and straight forward. It is an extremely fine powder filler so hiding blemishes is no problem at all. Regardless of whether you use Tetrion Filler, or go with a different product, you’re going to need tools to apply it. So, I thought I’d include a little section on what I use.
Yes, Tetrion All-Purpose filler can be used in a multitude of situations, but because they’ve tried to make a filler to do every single job, it desn’t do any job well. There are better products out there for every situation you’re going to come across. Yes, you will need a variety of products, but that’s just the way it is.
Similar products
After use, to keep remaining filler in perfect condition, replace plastic disc, cover with damp rag and reseal Build up deep repairs in layers no more than 5mm. Allow each layer to dry thoroughly before applying next I have switched over to Gyproc Easi-fill for interior walls and ceilings now. Easi-fil can only be used for this task really, but it outperforms Tetrion All-Purpose filler and it’s a whole lot cheaper. NOTE: Avoid using in wet or damp conditions. If rain or moisture is expected, cover repair with waterproof material