Joint It Simple Jointing Mortar Grey (1 x 20kg) - Large Size

Product Information

Ready to use deep cleaning solution that works on a wide range of outdoor surfaces, keep your patio, garden path and driveway looking their best all year round.

Work In: Using a squeegee or street broom, spread it evenly. Work in so that it goes deep into the joints and is compacted. Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes Preparation:- Make sure all joints are totally clear of any form of dirt, especially oil, grease and remove any loose debris/old jointing mortar or large particles. Final Cleaning: Clean the surface carefully with a fine hair broom so that all Joint-It residue is removed. Always sweep diagonally across joint.

Better Value Jointing Grout

Ready to use from the tub, no mixing, no second part to stir in, just open and use, simply brush in. Delivery is free of charge to all UK postcodes and will usually arrive within 2-3 working days via DHL. Joint-It Simple – can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. Joint-It Simple is a ready-mixed paving jointing mortar solution. This jointing mortar is both water-permeable and cement-free. At Pave Direct, It is available in two colours, neutral and grey.

Joint-It Simple– can be applied to concrete paving slabs, cobbles, and natural stones including – Sandstone, Granite, Limestone, Slate, Concrete Slabs, Yorkstone, and Porcelain tiles. 1. Prepare The Area Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt.Joint-It Dark Grey is the revolutionary NEW Paving Jointing Mortar for jointing paving slabs, cobbles & Natural Stone. All outdoor surfaces require some maintenance when exposed to the changing weather conditions and foot/vehicle traffic. We recommend cleaning your patio and joints with Joint-It So Clean or Joint-It Algae Remover every 3 to 4 months to keep it looking new. If a power washer is required, we recommend no more than 1500 PSI or 100 Bar water pressure, using a standard spray jet and not a turbo spinner. This will depend on how shaded your area is and how many overhanging plants there are. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results. Joint-It Simple – is a ready-mixed, permeable, jointing compound that can be applied in all weathers.

Failing to comply with this maintenance plan will lead to moss growing in the joints. If you leave it too long to apply an algae remover, the plant will likely have rooted deeply into your driveway gripping the jointing material. If this happens, we recommend power washing your driveway, applying a weed killer, and then reapplying Joint-It Fine approximately 10 days later. Add more water: Add more water sparingly to help Joint-It flow into joints of the paving, working diagonally across the joints to ensure Joint-It has penetrated all joints of the paving. You need a hard and soft brush and use the mortar with water on a water-permeable surface to get the best result.

Joint-It’s ‘Green Halo’

Developed by professional paving contractors for professional paving contractors and landscapers, our Specialist Hardscape Product Range delivers the exceptional results that our customers have come to expect.

Approximate coverage using 4 size random paving per 20kg tub is 10 -12 sq m, depending on joint width and depth or for more accurate calculation please use the handy joint IT calculator Take care not to brush the product out of joints or into nearby drains. JOINT-IT will start to harden in joints within 90 minutes at over 20 C degrees. In lower temperatures JOINT-IT will take longer to harden. Once bag is opened, contents must be used within 4 hours. Ensure the joints, all of the joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm up to 25mm is recommended.

Every Joint-It product is formulated to deliver a professional quality result, whether that’s to joint, clean, seal or enhance the colour of your natural stone or concrete paving. The Coverage:A 20kg tub will cover approximately 12-15m2 of paving. You can use a calculator here: https://jointit.com/uk-en/product-calculator/ Price Equality Assurance: Whether online or offline, we strive to maintain pricing consistency, ensuring you receive the same value no matter how you prefer to shop with us. The overall cost will likely be very similar, regardless of the method you choose.