Joined in 2023 
82 
63 About this deal
Get the most out of your LiveU Solo SDI/HDMI with the LiveU Reliable Streaming Service. Patented cloud bonding & encoding service for maximum bandwidth and ultimate reliability using LiveU Reliable Transport (LRT). Plugging one unit into the same network via more than one means (LAN and WIFi)? Always going to be a problem.
However, almost all modern (sold in the last 3 years) modems now use another technique to provide bandwidth to a host device - virtual ethernet ports. Why? the answer is pretty straightforward: this makes host OS support much more general, and alleviates the need for specialized drivers on the host OS. Especially for modems sold to consumers, its easy to see why this method of acting like a virtual ethernet port is beneficial to these devices. If you have any doubt or unsure, please open a support case and the support team can help identify for sure if the issue is IP conflict. About Subnets and IP Routing This is the most common example. You plug in two Huawei modems (or Alcatel, or others - just using Huawei as the example), both are the style of modem that acts a virtual ethernet port, both are in their "default" settings. These are just two examples, if some of the digits in your exact setup differ, it is still a conflict! Conflicts When moving from the Home screen to the Main screen, the Interfaces option is initially selected, as shown above. The selected option is highlighted in gray on the screen.Connect two cellular modems with Wi-Fi and LAN and we will bond them together to create a single fat connection for all your needs. OVP/CDN Integration But anything less than 255 in that position means more than one number is used, and if its a "0" it means all 256 numbers are used. Any number from 11 to 255 will do. Avoiding the "common" ones of 1, 8, and 10 will help avoid future conflicts with WiFi networks or LAN networks. Save the Settings and Reboot the Device and Solo
While each device is a little different, here are general steps that are applicable to all devices to help guide you. Get To The Settings For Your Device Once you have your account created, you will be asked to register your device if you have not already done so. You can enable or disable one (or even all) of the LiveU Solo interfaces. Each interface must be enabled/disabled separately. The examples below describe how to enable/disable cellular modem interfaces. These procedures are the same for all interface types (cellular modems, WiFi and LAN interfaces). Delivery timings are approximate and may differ due to circumstances outside of our control such as flight delays, traffic incidents, extreme weather etc.While the unit does have a start button to go live, some services need supplemental services started, such as transcode engines or rendering engines. In these cases, LiveU Solo portal manages thosesupplemental services for you, but can only do so when you start the stream from the Go Live buttoninside the portal.
Great Deal 
New Comment