Lubluelu 2 in 1 Robot Vacuum Cleaner with Mop 3000Pa, Lidar Navigation, 5 Real-Time Mapping,10 No-go Zones, Wifi/App/Alexa, Laser Robotic Vacuum Cleaner for Pet Hair, Carpet,Hard Floor

Product Information

I used it to vacuum immediately after receiving the product, but I feel that the battery is running out of power? Smartphone sau tableta dumneavoastră este conectată la o rețea Wi-Fi Doar (2,4 GHz sau 2,4 GHz_5G dublă canal). The whopping 22 sensors of the SL61 make it avoid obstacle collisions, and collisions may happen when the SL61 first maps your place, but over time, it should simply hug obstacles and move on. It also avoids falling off heights. The off-road wheels of the SL61 are supposed to help it cross 0.7″ thresholds.

In reality, the SL61 may struggle to activate on schedule, so you might have to trigger it manually regardless. How it mops With intelligent sensors, it can identify and avoid furniture, walls and obstacles to prevent collisions and falls. In addition, the device is equipped with an anti-drop sensor that prevents it from falling down the stairs or any other high places in your home. Lubluelu SG 60 is a smart gyroscopic robot vacuum that cleans in a zig-zag path, navigating efficiently and avoiding repetitive cleaning. Poor wire connection: Remove the tube then directly connected to the floor brush to see if it can work, if the floor brush can work, it is a tube failure. If the tube is removed, but the brush still can not work after the power is turned on, it is a floor brush failure. Before using Google Home to control the robot, you should take the following steps to connect the robot with it. Below we show you how to configure Lubluelu SG60 with Google Home.

What’s in the box?

Do not use the machine in the place of cliff without protective rails (such as duplex floors, open balcony, furniture top). Do not use the machine to clean the hard or sharp objects (such as decoration wastes, glass, iron nails, etc.) The floor brush is recommended to be cleaned once every 1-2 months, usually with a knife brush. If you think it is too dirty, you can wash it with water, but it must be dried before installation, otherwise it will damage the device.

App-Based Control and Voice Commands for Smart Cleaning: Featured with smart app and voice control, our robot vacuum allows you to monitor and customize the cleaning process through the Smart Life app. With Alexa or Google Assistant, you can easily start or stop cleaning using voice commands based on your customized map (only supports 2.4G network). Unsup ported s ignal band . Most smart vacuums support 2.4 GHz WiFi band. Hence, make sure your WiFi signal is 2.4 GHz. If your home router is dual-band, you can tune to the signal supported as the vac needs (2.4 GHz/5 GHz). 9. Machine Installation Problems With the help of voice assistants, you can use your voice to give commands and let the robot do the cleaning work for you. Do not use the machine in the place of cliff without protective rails (such as duplex floors, open balcony, furniture top).Electrical failure or protection: Because our products have high temperature protection,the battery has to be at 50-55 degrees to work properly. Please cool the battery 1-2H before charging when the temperature is too high.