FLSUN V400 3D Printer

Product Information

For Cura, it's needed to install Klipper Settings Plugin (available here: Klipper Settings Plugin) and enable Enable Firmware Retraction setting like that: Firmware retraction gives an advantage compared to Slicer retraction, it can be modified during a print (from Mainsail or KlipperScreen) and therefore the same gcode can be printed with different parameters without the need to be re-sliced. I also recommend using a microSD extension for future updates to avoid removing the cover each time. Files are sliced in Cura just like any other printer, then are transferred to the V400 via the Moonraker plugin, dragging and dropping into Mainsail, or by using the supplied USB drive. Printing on the FLSun V400 FLSUN V400 Adjustable Spool Holder: https://www.printables.com/model/274245-flsun-v400-adjustable-spool-holder

The tool for adjusting the timing belt tension can also be used for the FLSUN Super Racer (SR), as the timing belt spacing is the same as for the V400. The measurement should be taken at mid-height, between the lower and upper bearing roller of the timing belt. I have found 2 tools that use the spring force of a 3D printout as their functional principle. However, this spring force depends on the filament used, infill type and density, as well as the number of walls - all in all a rather random result. Számos 3D-nyomtató Bowden extruderrel van felszerelve, mert ez nagy nyomtatási sebességet biztosít, és a Direct Drive extruderrel ellentétben kisebb súlyt fektet a mozgó Hotendre. Az Flsun azonban valami egyedit alkotott a V400 nyomtatóval: a hotendet és az extruder házát kombinálták, ami egy különösen kompakt és könnyű rendszert eredményezett. Valószínűleg sikerült a piacra hozniuk az egyik legkönnyebb és egyben leggyorsabb Direct Drive extrudert! FLSun only included directions for using Cura. Trying to set up PrusaSlicer with the start and end gcode included for Cura doesn’t appear to work.Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. A rendkívüli, 300 x 410 mm-es nyomtatási mérettel elképesztő nyomatok készíthetőek a legjobb minőségben! A V400 magas nyomtatási formátumokhoz is alkalmas! To adjust manually Resonance Compensation, see here: https://www.klipper3d.org/Resonance_Compensation.html

Motherboard Mount for Easy Access to microSd port: https://www.printables.com/model/268464-flsun-v400-motherboard-mount A nyomtatóhoz előre telepítve van a Klipper Firmware. A Klipper első osztályú nyomtatási élményt és nagyfokú felhasználóbarátságot biztosít – akár WiFi távirányítóval is! The printer comes pre-installed with Klipper firmware . Klipper provides a first-class printing experience and ensures high user friendliness – even via WiFi remote control!With a 7-inch LCD touch screen, which is easy to use, handling is particularly user-friendly! The screen is powered by KlipperScreen . To use ADXL345 with FLSUN V400 for measuring Resonances it's necessary to use it via USB with a Raspberry Pi Pico. The Flsun V400 is an extremely user-friendly Delta 3D printer. The 3D printer features extremely fast printing speeds of up to 600 mm/s and an acceleration of 10 000 mm/s². This saves you more than 70% of the usual printing time while still producing high-quality 3D prints.

The Cura Profiles were updated by following the details in THIS file and a new V400 added to Cura (this is V400 #2 on my system and has 600mm/s as the max speed.

Start Gcode: START_PRINT BED_TEMP=[first_layer_bed_temperature] EXTRUDER_TEMP=[first_layer_temperature] Adjust Z-OFFSET, first you need to move to Z=0 and then adjust nozzle position with a sheet of paper. Start Gcode: START_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0} Our review copy of the FLSun V400 came with a copy of Ultimaker Cura 4.13.1 and one generic profile to get started. It also comes with the Moonraker plugin so it can connect the printer with your PC. The manual walks you through setting up the printer based on their previous model, the FLSun Super Racer. The Flsun V400 is an extremely user-friendly Delta 3D printer. The 3D printer is characterized by extremely high printing speeds of up to 400 mm/s! This saves you over 70% of your normal printing time while creating high quality 3D prints!