Official Creality Ender 3 V2 3D Printer with 32 Bit Silent Board Carborundum Glass Platform Integrated Structure Design and Resume Printing, 3D Printer for Beginner, 220x220x250mm

Product Information

Your goal is to see that the extruder nozzle is set at the same distance from the build plate no matter which corner you move it to. If there is no heating instruction and there is a 24V voltage, it seems that the main board is faulty, please replace the new main board; otherwise, it may be a thermal problem, replace the new one Thermal. Because each Revo nozzle diameter has its own colour, you can quickly see which nozzle diameter you have in the hotend. These beds were prone to accumulate filament residue over time, which ever so often resulted in ugly first layers.

BTW, aside from doing much better with TPU, my son says he doesn't see much difference between them.This feature aids the manual bed levelling process, ironing out any slight discrepancies after manual levelling. Just make sure that you put the washers back in the right place on the idler pulley or you will be chasing your tail looking for a problem you created! I expected that the extruder might be clogged, so I preheated the extruder to PLA melting temperature and took the long, very thin needle that Creality includes with the printer and poked it into the nozzle a few times.

Apart from those features, the Ender 3 NEO has a 32 bit silent mainboard (less than 50 db of noise), which means quiet printing and unobstructed studying or work. It's the same old Ender-3 3D Printer experience, improved with current hardware that includes a 32-bit mainboard, silent stepper motor drivers, a much cleaner appearance and design, plus plenty of other, smaller, touches.Overall, I liked learning to use the Ender-3 V2 Neo, and while I'm pretty early in my 3D printing journey, I'm feeling reasonably confident in my skills. The type here, too, is small and hard to read at times (though most of the steps are more comprehensible than the example I give above), and the descriptions of problems and solutions are curt. INCH COLOR SCREEN】The Ender-3 V2 uses new display equipped with UI LCD screen, user experience has been greatly upgraded with the newly designed operation UI system, convenient disassembly and simple operation. XY-axis tensioner: New to the Ender series are two knobs that will let you tighten the printer’s belts. Instead of the manual leveling that was necessary with the Ender 3, the Ender 3 NEO now has an added feature of CR Touch auto leveling where 16 point measurements of the bed surface are taken as reference.