MICROJIG Matchfit DVC-1177K2 Dovetail Clamp Pro, Green/Yellow/Silver

Product Information

I have never used a track before, and thought that this would be a good way to line up router-cut dados.

The big dovetail clamp Vixen+Losmandy PLUS for EQ6 allow to install on the Skywatcher EQ6 or N-EQ6 mount telescopes with Vixen and Losmandy type dovetail bars. Been looking at the micro jig dovetail clamps, you route a dovetail slot in your timber, slide in the clamp to secure it, and instant clamping.

Our dovetail clamp, therefore suitable to medium loads, it's made from a full aluminum block T6061 and red anodized to resist weathering. If I have one tiny niggle is that I wish the main bolt knob which tightens onto the dovetail was larger, (like the TS item). Invest in the MatchFit Ratchet Clamp AP by Microjig today, and unlock a new dimension in your woodworking journey. Make sure you understand how your router works and have a sturdy guide or you may end up with tracks that you cannot use. DIY Dovetail Tracks: With the MatchFit system, you can route your dovetail clamp tracks using a dovetail bit.

Fix the dovetail clamp/groove to ASIAIR PRO with the screws that you just took off from the dovetail bar. Built to resist vibrations, the MatchFit Ratchet Clamp AP ensures a steadfast setup even during rigorous tasks. More than 15,000 Baader planetariums (the company’s first patented product) help students around the world to understand astronomical relationships. The positive lock of the ratchet mechanism resists loosening even under heavy vibration such as grinding or routing. Hardware Pack you can create a variety of sleds, jigs and fixtures with hold downs and stops that can move freely and lock down where needed anywhere you can.

Create your own dovetail clamp tracks with any standard 1/2” 14-degree dovetail router bit, eliminating the need for expensive aluminium tracks.

I have been after a clamp to fit to my guide scope to make it easier to move to other scopes without having to use spanners. Does seem expensive for what you get, as I felt the same when I opened the kit box, but in use, and being able to stick tracks anywhere you want, it really does come into its own. The prism clamp has 2 x 6mm countersunk holes (35mm hole spacing) and 3 additional 1/4" photo tapped holes at 120 degrees angular distance on a pitch circle diameter of 55 mm to allow a versatile adaptation to a variety of other telescopes and adapter plates. By using the MATCHFIT Dovetail Clamp Pro you will easily be able to quickly execute projects around your home.The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance).