Potterton EP2 Twin Channel Programmer

Product Information

I carefully cut the central support out and discarded it; this allowed me to push the wires back into the pattress and the programmer to fully locate on the backplate. Instructions good, but you also need to use the supplied installer instructions to get it working right for you. The POTTERTON 7211473 ELECTRONIC PROGRAMMER EP2 is a genuine, brand new Potterton Boiler Spares product, covered by a Potterton Boiler Spares manufacturer's guarantee.

In the initial set up of the programmer, the installer can select a programmer option, based on the wiring and the type of system, pumped or gravity. Fully Pumped or Gravity System if just swapping front plate EP2001 for EP2 is it gravity system setting you put just standard oil boiler. My only minor criticism with the design is the software which leaves the LED screen on full, glaring out it's bright blue display 24/7 for no reason. A couple of the holes where the tommy-bar fits had burrs but these were easily removed using a round file.Hello, I have a existing EP3002 and for some time now the boiler doesn't always shutdown when it's timed to. Read the instructions but still no luck in clearing out all the seven days of the week along the top of the screen.

Compatible with backplates from the existing EP range the Potterton EP series 2 configurable two channel programmer makes installation easy with no need to carry out additional wiring. A direct replacement for my old worn out EP2002, easy to remove, simply pop a flat screwdriver into the small slot underneath and lever upwards. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. The Potterton EP2 Programmer can be used for replacing existing older Potterton EP2000, EP2002, EP3002, EP6002 Models using the existing backplates with no rewiring necessary providing the existing backplate is not daMaged and in good condition.

The thing I really like about all the Potterton programmers I have used and I have now had 3 different ones, is that they all fit onto the same backplate and control the same wiring. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.

Will have another go later tonight but have left the on and off times for all seven days of the week. Gone through the instruction sheet but it is not clear when or how to access just the individual days.Took 5 minutes to swap the new EP2 for the older programmer, and 4 of those were spent looking over the installation instructions to check I'd bought the right thing. They mention that it is an excellent replacement for their old or broken predesessor, and it easily replaces the previous model.

Would have thought that after use they would go out until a button was pressed to turn them on when needed. It also has a backlit display which is great to see in a dark airing cupboard and the backup battery is a readily available CR2032 instead of the previous specialist or soldered in ones. Keep hitting the Yes button to go forward after the times have been set up but do not seem to get the actual day of the week to set up for Sat and Sun. The new EP2 Twin Channel Programmer can be used with backplates from the existing EP range making it quick and easy to fit without requiring any additional wiring. And an easy DIY job - no plumbing or electrical expert required if you've already got a wired-in Potterton back-plate.I also have a spare backplate with just a mains connection on it and the locking part of the catch filed off so that I can set the programmer up on the table as it is too awkward to work in the airing cupboard and of course the memory battery holds the settings. Some say that it's an ideal direct replacement and that it works seamlessly with their existing boiler.