Drill Hammer Chisel SDS Plus Tile Removal Tool Hammer Drill Chisel Cleaning Tools Plaster Tiles Removal Wall Shovels for Construction and Renovation

Product Information

Use Different Tools: If increasing the force isn’t working or isn’t an option, you could try using different tools. A pry bar might be useful to get underneath the plaster and apply pressure in a different way. Stripping artex with a steamer cannot be done at speed, you will need to work slowly and methodically as if the steam plate is left in one area too long, there is a possibility of damaging the ceiling or wall behind it as the steam will penetrate through and soften this also, which you certainly don’t want. The lath is generally made up of thin, closely spaced wooden strips. These strips are nailed to the studs in the wall. Depending on the age and history of your house, the lath may be in various states of condition, ranging from relatively sturdy to quite brittle. Start at the Top If there are, gently remove them and place if a plastic bin bag. However, if your surface has asbestos in it, don’t touch it! You will need to get the professionals in to remove it correctly and prevent any fibres from being released into the air. Plaster or Board over it: A good solution to use as a decent plasterer will be able to either plasterboard or plaster over it and leave you with a nice smooth and safe surface, however it will still be there, just covered over

Personally, when levering the board of the wall, I like to use two tools. This puts less strain on the board and makes the job easier. For example, you may use a crowbar and a chisel in combination or even two crowbars. Take regular breaks during the process. Not only is the work physically demanding, but the dust created can make the environment challenging. A dust mask and frequent ventilation of the room are highly recommended. Dealing with Stubborn SectionsThere are many potential ways of removing artex but there are only 4 correct ways to do so; using a steamer, using a specialist artex removal product, plastering over it or plaster boarding over it. Each has it’s own advantages and disadvantages. Cold Chisel: A wide, flat cold chisel is typically best for removing plaster. It allows you to get under the plaster and lever it away from the wall.

We have more information about asbestos, how to recognise it and what to do it you have it in our removing asbestos project. Methods for Removing Artex Next, cover any and all flooring with plastic dust sheets as again, plaster can soak in and once dry is a nightmare to get out. To remove artex using a standard wallpaper steamer, work through the following steps. For the purposes of this example we will be stripping artex off of a ceiling: Use a Specialist Company: If you are in any way worried about working around it, then it’s best to get the pros in to remove it safely and correctly for you, however this service will likely cost

Yank Off the Lath Board

Select a sturdy utility knife. The blade should be sharp and long enough to score through the depth of the plaster. A dull blade won’t be as effective and can actually make the task more difficult. You can typically find suitable utility knives at your local hardware store. Scoring the Wall