Dyson DC19 Cylinder Vacuum Cleaner

Product Information

As you can see above, a replacement turbine head for a DC23 will cost you fifty five of your hard-earned pounds if bought from Dyson.

Thankfully, in recent years, Dyson have began to standardise fittings once more. That isn’t to say all are interchangeable, but similarities exist where they didn’t before on some models. Dyson turbine heads (sometimes called turbo heads) are the full size vacuum-driven heads that come with many models of cylinder or canister Dyson vacuum cleaners.

Tweet feed

Dyson Red Button Tools: Two Sizes That Look the Same. CY22, CY23, Light Ball & Big Ball Adaptors Explained.

Most Dyson specialists will groan when asked to identify which turbine head fits which particular model. Especially since, with used machines, people may have swapped and changed handles, hoses and wands to make similar heads fit. You can buy them for attaching to the wand of upright machines too (But why would you?), but application is mostly designed for canister/cylinder machines.

Often compared with Dyson DC19

This not only means you can use the spiffy adaptor to utilise older tools we reported on a few months ago, but it also means that you can get yourself one of these replacement turbine heads. Depending on your machine model, they may not locate too well (or at all) on the machine for storage. But very few people stow their head on the machine in any event. Most people store them in a tangle under the stairs.

However, as many of those who tried to buy a replacement item have found, fittings can differ greatly between models. And they are not interchangeable without stripping them down to swap over collars – which isn’t an amateur job. The DC19's cyclone technology captures microscopic dust and allergens and ensures a strong suction power. Therefore it can provide a thorough clean even in hard-to-reach areas. The vacuum cleaner also comes with a washable HEPA filter, expelling cleaner air than the air it took in. It is designed for multi-level cleaning, making the vacuum a versatile machine that adapts well to different surface types. If you are a the owner of a DC02, DC05, DC08, DC11, standard DC19, DC20 or DC21, this will not fit your machine. Use the comment box below to ask what your options are if you have one of those models. Dyson got into the habit of supplying new ones with a range of adaptors. But specialists know that even they do not allow fitment to all models. Far from it in fact. Dyson themselves often supply the wrong part such is the difficulty.

Over time – such as with the DC05 Motorhead – Dyson have experimented with electrically driven turbine heads. But most are vacuum-driven. They are designed to replicate the beater bar action of a conventional upright vacuum cleaner by utlising a rotating brush on the carpet to dislodge dirt.